山东美国分析仪优惠价格

Procedure – Powder/Chip Samples

Instrument calibration/drift correction.

Calibrate/drift following the procedure outlined in the operator's instruction manual.

Login Sample with the appropriate number of reps.

Weigh approximately *** grams of appropriately prepared sample into a *** Nickel Capsule, enter mass and sample identification into appropriate rep fields. If applicable, place the nickel capsule in the

appropriate autoloader position.

Repeat steps 3c through 3i for sample analysis.

Determine the instrument blank.

a. Login a minimum of 3 Blank replicates.

b. Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open.

c. Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.

d. Clean the upper and lower electrode manually, or, if applicable, remove thecrucible and press the analyze button to clean with the automatic cleaner.

e. Firmly place a graphite crucible on the lower electrode tip.

f. Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and endautomatically.

g. Repeat steps 2b through 2f a minimum of three times.

h. Set the blank following the procedure outlined in the operator's instruction manual.

广东美国分析仪供应商试样加载过程中完全密闭，消除大气的中可能带来的杂质的污染。

Procedure – Powder/Chip Samples

Prepare the instrument as outlined in the operator's instruction manual.

Login a minimum of three Blank reps.

Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open. Insert a *** Nickel Capsule (leave capsule open) into the open port at top of loading head.

Note: samples using automation should be placed in the appropriate autoloader position before starting the analysis sequence. Once the sequence has started, the automatic analysis will start and end automatically.

Sample Preparation

Typically, titanium and zirconium samples are chemically etched to remove surface contamination when oxygen and nitrogen are determined. However, etching can introduce hydrogen into the sample.

ASTM method E 1409 "Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert

Gas Fusion Technique", as updated in 1996, permits either etching or abrading (filing) of the test specimen.

ASTM E 1447 "Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal

Conductivity/Infrared Detection Method" permits surface preparation by abrading (if necessary to remove

contamination). Differences in sample preparation present somewhat of a dilemma regarding simultaneous

determination of O, N, and H in titanium. However, abrading samples with a file to remove surface

contamination will yield accurate O, N, and H results. The ONH836 utilizes a high-power electrode furnace to quickly and efficiently release the target gases from within the sample, which allows for a very rapid simultaneous determination of oxygen, nitrogen, and hydrogen.

Procedure - Solid Samples

Instrument calibration/drift correction.

Add approximately 0.05 g of *** Graphite Powder to a *** Graphite Crucible.

Firmly place the crucible on the lower electrode tip or appropriate autoloader position.

Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically.

Repeat steps 3b through 3j a minimum of three times for each calibration/drift standard used.

Calibrate/drift following the procedure outlined in the operator's instruction manual.

氧氮氢分析仪选哪家？给你推荐上海禹重科技！山东美国分析仪优惠价格

仪器仪表行业已经连续多年保持了经济高位运行的态势。即使当全球受金融风暴的影响，各个行业经济东圃有所放缓，但从全景发展情况看来，仪表行业的增长速度并没有放缓。在计算机和互联网的急速发展到整个世界的背景下，仪器仪表也开始向网络化突进，结合新的科技设备，通过广域网和局域网直接操控仪器仪表，对公司的管理，经营一体化，应用模式的分析等各大方面产生影响。有限责任公司（自然）企业通过网络这个平台与客户直接的交流，突破了世界和空间的限制，行家远程操控对仪器仪表进行维护和分析。高科技的产品也随之而来。工业领域转型升级、提升发展质量等有利于仪器仪表行业的发展；**安全、社会安全、产业和信息安全等需要自主、光谱仪，色谱仪，质谱仪，样品前处理装备，成为全社会共识；随着中国的不断进步，世界上只有一个救世主——市场，能救企业的只有你自己——自强，提高服务型重点竞争力才是中国制造业的独一出路。以显微科学仪器行业的发展与变化为例，以亲身的实践为例，毛磊认为，随着经济的不断发展，我国的环境和实力都发生了巨大变化，有了完全不同的基础，这为国产科学仪器走向**增强了信心。山东美国分析仪优惠价格

上海禹重实业有限公司位于友东路237号1幢104室。公司自成立以来，以质量为发展，让匠心弥散在每个细节，公司旗下光谱仪，色谱仪，质谱仪，样品前处理深受客户的喜爱。公司秉持诚信为本的经营理念，在仪器仪表深耕多年，以技术为先导，以自主产品为重点，发挥人才优势，打造仪器仪表良好品牌。在社会各界的鼎力支持下，持续创新，不断铸造***服务体验，为客户成功提供坚实有力的支持。